Key points of concealed sprinkler installation
  • Date:2022-01-05
  • Read:408
1. Height
When installing the shower, we should first determine the height of the shower mixing valve from the ground. Generally, we have determined the installation place of the shower before the concealed shower. The distance between the shower mixing valve and the ground is generally controlled within a height range of about 90-100cm. In this range, we can also fine tune according to our height. However, it is generally not higher than 110cm. If it is too high, the shower riser may not be installed.

2. Pay attention to aesthetics
Generally, the reserved wire head of the installed shower faucet is just buried in the wall tile. It is best to cover it with a decorative cover. Otherwise it will not look very beautiful. Therefore, it is best for everyone to consider clearly the reserved position when laying the pipeline. Generally, it is 15mm higher than the blank wall, so that the wire head can be buried when pasting the ceramic tile to ensure the beauty of the wall.

3. Reserved spacing of threaded elbow
The spacing reserved for the inner wire elbow of shower is generally about 10 ~ 15cm. Generally, when buying a shower, the seller will give two adapters, so that the water outlet of the mixing valve can be well connected to the cold and hot water outlet on the wall. However, try not to use the adapter to transfer, which is more beautiful.

4. Pay attention to matching the shower with the water pipe at home
At present, there are many kinds of shower in the market, including surface mounted, wall mounted and ceiling mounted. Therefore, before purchasing, you must understand whether the water pipes laid in your home match. Do not blindly choose shower, causing unnecessary losses.

The company has a professional team, rigorous management and advanced equipment, and focuses on R & D to create a professional concealed shower fashion bathroom brand. We look forward to cooperating with you!

How to realize the very simple concealed shower?


Four characteristics of new sanitary ware